Please find the Peloton Tread and Tread+ dimensions and specifications below.
Tread and Tread+ Specs and Dimensions
Recommended Ceiling Heights By User Height
Tread and Tread+ Performance
Tread and Tread+ Operating Temperature
Tread and Tread+ Usage Requirements
Tread and Tread+ Specs and Dimensions
|
Measurements |
Tread |
Tread+ |
| Footprint | 5.6' L x 2.7' W | 6' x 2.7' |
| Dimensions | 68” L x 33” W x 62” H | 72.5" L x 32.5" W x 72" H |
| Belt | 59” L x 20” W | 67" L x 20" W |
| Touchscreen | 23.8” Diagonal | 32" diagonal |
| Weight | 290 lb | 455 lb |
Recommended Ceiling Heights By User Height
|
Ceiling Height |
User Height |
| Up to 7' | Up to 5'2" |
| 7' to 7'6" | Up to 5'7" |
| 7'6" to 8' | Up to 6'1" |
| 9' | All heights |
Tread and Tread+ Performance
|
Feature |
Tread |
Tread+ |
| Speed | 0 - 12.5 mph | 0 - 12.5 mph |
| Incline | 0 - 12.5% grade | 0 - 15% grade |
| Screen Adjustment | 0 - 50° vertical tilt | 0 - 30° vertical tilt |
| Power Requirements | 120V, 60Hz, 15A dedicated circuit | 120V, 60Hz, 15A dedicated circuit |
Tread and Tread+ Operating Temperature
The Peloton Tread and Tread+ should be used and/or stored in dry, indoor areas only. The Tread and Tread+ can be safely operated in temperatures between 32°F and 104°F (0°C to 40°C) and stored between -4°F to 140°F (-20°C to 60°C). Any temperatures outside of these ranges may result in mechanical and/or electrical complications.
Do not use or store the Tread or Tread+ outdoors or in damp/wet locations.
Tread and Tread+ Usage Requirements
POWER REQUIREMENTS
The power requirements for the Tread and Tread+ are: 120V, 60Hz, 15A dedicated circuit (North America only).
The Tread should be connected to a dedicated circuit. For an uninterrupted experience, avoid GFCI outlets.
A dedicated circuit connects one (1) outlet to one (1) breaker. To determine if the outlet is on a dedicated circuit, please check your home's electrical panel.
GFCI (Ground-Fault Circuit Interrupter) Outlets
Ground-fault circuit interrupter outlets are designed to shut off if too much power is flowing through the ground port.
The Peloton Tread and Tread+ use the ground on the outlet to disperse static electricity generated by machine operation, so if it’s plugged into a GFCI outlet, it’s likely to trip the breaker and shut down.
If this occurs, move the treadmill to a different outlet.
- GFCI outlets are usually found in bathrooms, kitchens, and other areas where interacting with water is common.
- You can often identify GCFI outlets by the red or white reset switch on the faceplate, but GFCI breakers often cover nearby outlets, too. Try moving the Tread to a different area.
- Remember that the Tread+ needs its own dedicated circuit.
WIFI REQUIREMENTS
We recommend a minimum download speed of 10-15 mbps and a minimum upload speed of 2.5 mbps.
USER REQUIREMENTS
The Peloton Tread and Tread+ are built and tested only for users between 4'11'' and 6'4'’ (150 - 193 cm) in height and between 105 and 300 lbs (48 - 136 kg) in weight.
Individuals outside this height or weight range should not use the Tread.
The Peloton Tread and Tread+ are intended only for people over the age of 16. Keep children and pets away from the Tread at all times.
Ready to run? Explore our Tread here.
You can also access our entire library of classes and work out with equipment or none at all on your phone, tablet, TV, or web browser using the Peloton App.