Power Requirements
The power requirements for the Tread/Tread+: 120V, 60Hz, 15A dedicated circuit (North America only).
For an uninterrupted experience, avoid the following type outlets:
- GFCI
- AFCI
The Tread should be connected to a dedicated circuit.
GFCI (Ground-Fault Circuit Interrupter) Outlets
Ground-Fault Circuit Interrupter outlets are designed to shut off if too much power is flowing through the ground port.
The Tread/Tread+ uses the ground on the outlet to disperse static electricity generated by machine operation, so if it’s plugged into a GFCI outlet, it’s likely to trip the breaker and shut down.
If this occurs, move the treadmill to a different outlet.
- GFCI outlets are usually found in bathrooms, kitchens, and other areas where interacting with water is common.
- You can often identify GCFI outlets by the red or white reset switch on the face plate, but GFCI breakers often cover nearby outlets, too. Try moving the Tread to a different area.
- Remember that the Tread+ needs its own dedicated circuit.
AFCI (Arc-Fault Circuit Interrupter) Outlets
Arc-Fault Circuit Interrupter outlets shut off when they detect frequencies associated with wire arcing, a leading cause of electrical fires. AFCIs are very sensitive, and sometimes identify normal circuit behaviors as arc faults.
- If the first outlet on a branch has an AFCI installed, the AFCI will provide arc-fault protection for the entire circuit.
- North American electrical codes require AFCI outlets in many areas in the home, especially in newer buildings. If you can’t find a non-AFCI outlet, contact an electrician.