When your Peloton Bike arrives, your delivery technician will ask where you would like your Bike installed. Here are a couple of tips we’ve heard from our members on where to place your bike in your home:
Check your WiFi speed
- Before finalising your Bike’s location, we recommend running a speed test from a mobile device to confirm the area receives a consistent signal.
- To log into your Peloton Bike and access your profile and content, the Peloton touchscreen must be connected to your network and successfully access the internet.
- We recommend a minimum connection speed of 10-15 Mbps download and 2.5 Mbps upload.
Confirm there is space/room for your Bike
- With a compact 4’x2’ (122cm x 61cm) footprint, the Peloton Bike will fit into any room in your home. We recommend a minimum ceiling height of 8’ (244cm) to ensure you have enough headroom for a smooth ride.
- With the purchase of the Bike, we recommend installing a sports mat underneath your Bike to protect your floors.
- If you are installing your Bike on carpeted floors, the mat will add additional stability to help prevent your Bike from rocking as you ride.
- Members with thick pile carpeting recommend installing ¼” plywood underneath the mat to ensure a stable ride.
Confirm There Is Space/Room For Your Tread
Make sure the Tread has plenty of space before delivery.
- The Peloton Tread footprint is roughly 5.6' L x 2.7' W (172cm L x 84cm W).
Based on user height, we recommend the following for Tread Members:
- 7' ceiling best for 5'2" and under
- 7'6" ceiling best for 5'7" and under
- 8' ceiling best for 6'1" and under
- 9' ceiling suitable for all heights
The Tread should have 78.7" (6' 5") of clearance directly behind it and 20" (1' 7) of clearance on both the right and left-hand sides.
- Important: Make sure the Tread is installed on a flat, hard surface. Avoid carpets with a high pile.
Make sure the Bike has access to a power outlet
- The Peloton Bike comes with a 10-foot (3-metre) power adaptor which you can use to fit in any space.
- If the Bike is too far away from an outlet, we recommend using an extension cord to ensure consistent power.
- The power adapter uses a three-pronged plug and will work in a standard outlet in your home.
Ensure The Tread Has Access To A Power Outlet
- The Peloton Tread comes with a 6-foot (1.83-metre) power adaptor.
- If the Tread is too far away from an outlet, we recommend moving the Tread closer as we do not recommend using an extension cord.
- The power adaptor should never run underneath the Tread.
- The power requirements for the Tread are: 230V, 50Hz, 13A dedicated circuit (UK only)
- Please note, a dedicated circuit is intended for use of a single appliance.